Mandrel Release Agent
Mandrel release agent is a synthetic liquid lubricant that significantly reduces friction between the uncured rubber hose and the mandrel. It remains effective throughout the vulcanization process, allowing the cured hose to be easily removed from the hot mandrel..

- MD-295 (AI 20)
MD-295 (AI 20) is a liquid mandrel release agent designed to facilitate both the application of uncured rubber hoses onto mandrels and the removal of cured hoses from mandrels.
MD-295 (AI 20) performs effectively with NBR, NBR-PVC, EPDM, CR, acrylic, and ECO rubber compounds. It does not adversely affect the properties of the rubber compounds.
Any residual product remaining on cured hoses can be easily rinsed off with water at temperatures ranging from 60°C to 80°C.
Key Advantages
-
-
-
- Improved workplace cleanliness – Helps maintain a cleaner, dust-free working environment.
- No adverse effect on rubber color or finished product appearance.
- No blooming or yellowing effect.
-
-
Application
MD-295 (AI 20) can be applied directly or diluted with water at a ratio of 2:1 or 1:1, depending on the user’s application requirements and preferred working practices.
MD-295 (AI 20) is non-corrosive and has a low irritation potential. Standard industrial hygiene and safety precautions should be observed during handling and application.
2. MD-295 P3-2
MD-295P3-2 is a liquid mandrel release agent designed to facilitate both the mounting of uncured rubber hoses onto mandrels and the removal of cured hoses from mandrels.
MD-295P3-2 performs effectively with NBR, NBR-PVC, EPDM, CR, acrylic, and ECO rubber compounds. It does not adversely affect the properties of rubber compounds.
Residual product remaining on cured hoses can be rinsed off with water at temperatures ranging from 60°C to 80°C.
Key Advantages
-
-
-
- Improved workplace cleanliness – Dust-free application.
- No adverse effect on rubber color or finished product appearance.
- No blooming or yellowing effect.
-
-
Application
MD-295P3-2 can be applied directly or diluted with water at a ratio of 1:3 (1 part MD-295P3-2 to 3 parts water). The recommended dilution ratio may vary depending on the rubber compound formulation and the user’s application requirements.
3. BIO 700 K
Bio 700 K-2 is a liquid mandrel release agent designed to facilitate both the mounting of uncured rubber hoses onto mandrels and the removal of cured hoses from mandrels.
Bio 700 K performs effectively with NBR, NBR-PVC, EPDM, CR, acrylic, and ECO rubber compounds. It does not adversely affect the properties of rubber compounds.
Residual product remaining on cured hoses can be rinsed off with water at temperatures ranging from 60°C to 80°C.
Key Advantages
-
-
-
- Improved workplace cleanliness – Dust-free application.
- No adverse effect on rubber color or finished product appearance.
- No blooming or yellowing effect.
-
-
Application
Bio-700 K can be applied directly without any dilution needed. Bio-700 K is non-corrosive but slightly irritating, standard precautions of working hygiene must be observed.
